Customization: | Available |
---|---|
Nature of Source Flow: | Active Inverter |
Phase: | Single |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model | HSI-351 | HSI-501 | HSI-601 | HSI-801 | HSI-102 | HSI-122 | |
Rated Power | 350W | 500W | 600W | 800W | 1KW | 1.2KW | |
Peak Power | 1050W | 1500W | 1800W | 2400W | 3KW | 3.6KW | |
Nominal battery voltage | 12VDC | 12VDC/24VDC | |||||
Input | DC input range | 10.5-15VDC (12V) / 21-30VDC (24V) | |||||
AC Mains input range | (220/230/240VAC) 140-275VAC | ||||||
AC input frequency | 50Hz: 45-65Hz / 60Hz: 55-65Hz (50Hz/60Hz automatic recognition) | ||||||
Protection | Low battery alarm | ≤10.5VDC (12V) / ≤21VDC (24V) alarm | |||||
Low battery protection | ≤10VDC (12V) / ≤20VDC (24V) automatic shutdown | ||||||
High battery alarm | ≥15VDC (12V) / ≥30VDC (24V) alarm | ||||||
High battery protection | ≥17VDC (12V) / ≥34VDC (24V) automatic shutdown | ||||||
Overload protection | 110% more than rated capacity, automatic shutdown | ||||||
High temperature | Built-in temperature real-time sensor, ≥85ºC alarm, ≥90ºC automatic shutdown | ||||||
Short circuit protection | Automatic shutdown | ||||||
Output | Transfer efficiency | ≥87% | |||||
Output voltage | (DC battery mode) 220/230/240VAC±2% | ||||||
Output frequency | (DC battery mode) 60/50Hz±1% | ||||||
Output waveform | Pure sine wave | ||||||
Output voltage | (AC mains mode) stable 220/230/240VAC±10% output (built-in AVR stabilizer) | ||||||
AVR output stabilizer | AC mains<140VAC±5% switch to DC battery mode, AC mains>150VAC ±5% return to AC mains mode; | ||||||
AC mains>275VAC±5% switch to DC battery mode, AC mains<255VAC ±5% return to AC mains mode; | |||||||
The above is for output 220V system reference, 230V/240V output just multiply by the percentage | |||||||
Output frequency | (AC mains mode) automatic tracing from AC input | ||||||
Other | Transfer time | Bult- in AC bypass replay (≤8ms) | |||||
Display | LCD Display with function buttons | ||||||
Cooling system | The intelligent cooling fan control system | ||||||
≤42ºC slow fan, ≥45ºC fast fan | |||||||
AC Charger | AC charging Voltage | 13.6-14.2VDC(12V)/27.2-28.4VDC(24V) | |||||
AC charging current | Steady 15A | ||||||
AC overcharge protection | Battery >=16V (12V) >=32V (24V) , stop charging after 60s alarm | ||||||
Working mode (Optional) |
01 | AC mains priority | |||||
Always use AC mains as priority input to provide AC output and automatically charge the battery, | |||||||
only stops charging when the battery is fully charged, and only starts DC to AC converting until AC mains is off | |||||||
02 | Energy saving | ||||||
Loading≤10% automatic shutdown, loading≥11%-100% automatic turn on | |||||||
03 | DC battery priority | ||||||
Always use DC battery as priority input to provide AC output, for 12V system, when battery≥13V, starts DC to | |||||||
AC converting; when battery≤10.5V during converting, switch to AC mains mode to provide AC output and | |||||||
automatically start charging the battery (for 24Vsystem, multiply by 2 accordingly) | |||||||
Communication | RS-232/USB/SNMP(additional option) | ||||||
Environment | Temperature | -20~+75ºC | |||||
Humidity | <95% | ||||||
PWM Solar Controller specification | Charging & discharging | 20A | 30A | ||||
Max. PV input voltage | Max. 30V(12V) / 50V (24V) | ||||||
System voltage | 12V / 24V | ||||||
No load current | <5mA | ||||||
Charging circuit drop | ≤0.2V | ||||||
Discharging circuit drop | ≤0.15V | ||||||
Overcharge protection | 17V (12V) / 34V (24V) stop charging | ||||||
Boost charging | 14.6V (12V) / 29.2V (24V) Duration: 30mins | ||||||
Direct charging | 14.4V (12V) / 28.8V (24V) Duration: 30mins | ||||||
Float charging | 13.6V(12V) / 27.2V (24V) until reach charging recovery voltage | ||||||
Charging recovery | 13.8V (12V) / 27.6V (24V) | ||||||
Over-discharging recovery | 12.5V (12V) / 25V (24V) | ||||||
Low voltage | 10.5V (12V) / 21V (24V) alarm | ||||||
Over-discharging | 10V (12V) / 20V (24V) automatic shutdown | ||||||
Temperature compensation | -4.0mv/ºC/2V(Boost charging, Direct charging, float charging and charging recover voltage compensation) | ||||||
Control method | PWM smart charging | ||||||
Working temperature | -20~+75ºC | ||||||
Circuit protection | Overcharging, over discharging, overload and short circuit protection | All protections are harmless to any parts and fuse of the controller; fuse is only for ultimate protection. | |||||
Anti-connection-reverse protection for solar panel | |||||||
Appearance | Product size (mm) | 280*275*120mm | |||||
Packing size (mm) | 345*315*187mm | ||||||
Net Weight (kg) | 7.8kg | 8.4kg | 8.6kg | 9.3kg | 9.5kg | 9.8kg | |
Gross Weight (kg) | 8.3kg | 9.0kg | 9.1kg | 9.8kg | 10.0kg | 10.3kg | |
*Product specifications are subject to change without further notice |